Heavy Duty Fabric Conveyor Belts

Short Description:

Heavy Conveyor Belt is designed for use as an abrasion resistant and impact resistant rubber sheet and is ideal for mounting pads, mechanical sealing strips and industrial flapping In general construction and industrial use where durability is imperative and ordinary rubber is not up to the task, this rubber product is used to maximize the life of the project Heavy Conveyor Belt is available in a 2ply and 3ply fabric insertions in the rubber sheet The 2ply is 75 millimeters thick, and the 3ply is 105 millimeters thick This is the most abrasion and tear resistant rubber product ideal for industrial bumpers and skirting This rubber roll is made from a blend of Neoprene, SBR, and Nitrile Rubbers with a smooth, finished surface It is used to maximize the life of a project where durability is imperative and ordinary rubber is not sufficient

Send email to us Download as PDF

Product Detail

Product Tags

> The universal fabric conveyor belts are made of EP, NN or Cotton fabric and finished through the processes of calendaring, firming and vulcanizing, etc.

> It is suitable to convey in normal temperature non-corrosive pointless lumps, granules or powders such as coal, coke, sand and cement in bulk or packaged.

> Belts with cover grade are in accordance to International standards such as DIN 22102, RMA, AS 1332, SABS 1173/2000, IS 1891, BS 490, JIS K 6322, etc.

Standards	Cover Rubber			Adhesion
	Tensile	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
	Strength
DIN 22102	Mpa	%	mm3	N/mm	N/mm	N/mm
					(>1.5mm)
DIN22102-Z	15	350	250	3月5日	4.5	5
DIN 22102-W	18	400	90	3.5	4.5	5
DIN22102-Y	20	400	150	3.5	4.5	5
DIN 22102-X	25	450	120	3.5	4.5	5

Standards	Cover Rubber			Adhesion
	Tensile	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
	Strength
RMA	Mpa	%	mm3	N/mm	N/mm	N/mm
				(<1.6mm)	(>1.6mm)
RMA-I	17	400	200	3	4.4	4
RMA-II	14	400	250	3	4.4	4

Standards	Cover Rubber			Adhesion
	Tensile	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
	Strength
AS 1332	Mpa	%	mm3	N/mm	N/mm	N/mm
				(<1.9mm)	(>1.9mm)
AS 1332-N17	17	400	200	4	4.8	6
AS 1332-M24	24	450	125	4	4.8	6