High reputation Stainless Steel Mesh Conveyor Belt - Wire Mesh Conveyor Belt Flat-Flex Type – JIKE Detail:
Flat-Flex® XT® conveyor belt is available in the following belt meshes:
- 7.26 X 1.60 mm
- 12.7 x 1.83 mm
- 9.60 x 1.83 mm
- 9.60 x 2.08 mm
Edge Loop Types Available:
C-Cure-Edge®
Single Loop Edge (SLE)
Flat-Flex® XT® Quick Reference Chart
|
XT Code Reference |
Pitch and Wire Diameter |
Nominal opening between wires |
Edge Loop Size |
XT Space Width |
Minimum Large Space Width |
Average Belt Weight (Kgs/m²) |
Maximum Tension per Joint – Kgf (N) |
Minimum Transfer Outside Diameter (grooved) |
Typical Open Area (%) |
|
X426 |
7.26 x 1.6 |
5.66 |
7 |
22.23 |
50.8 |
2.9 |
6.8 (66.7) |
19 |
71 |
|
X247 |
12.7 x 1.83 |
10.87 |
7 |
22.23 |
44.45 |
2.7 |
8.2 (80) |
25 |
78 |
|
X327 |
9.6 x 1.83 |
7.77 |
8 |
22.23 |
57.15 |
3.1 |
8.2 (80) |
25 |
74 |
|
X328 |
9.6 x 2.08 |
7.52 |
8 |
25.4 |
82.55 |
3.75 |
10 (98) |
25 |
72 |
| Width Tolerance(max. width 4267mm);0 to 150 belt width: +/-0.8 150 to 900 belt width: +/-1.9 900 to 1500 belt width: +/-2.4 over 1500 belt width: +/-3.2 |
|||||||||
All dimensions are in millimetres (mm)
Component and Support Requirements for Flat-Flex® XT® Belts
|
COMPONENT QUANTITY CHART (SPROCKETS / BLANKS / SUPPORT STRIPS) |
||||
|
Number of XT spaces across belt |
Drive shaft |
Idler shaft |
Belt supports |
|
|
Number of Sprockets |
Number of |
Wear Strips |
||
|
Sprockets |
Blanks |
|||
|
3 |
3 |
2 |
1 |
2 |
|
4 |
4 |
2 |
2 |
3 |
|
5 |
5 |
2 |
3 |
4 |
|
6 |
6 |
2 |
4 |
5 |
|
7 |
7 |
2 |
5 |
6 |
|
8 |
8 |
2 |
6 |
7 |
|
9 |
9 |
2 |
7 |
8 |
|
10 |
10 |
2 |
8 |
9 |
|
11 |
11 |
2 |
9 |
10 |
|
12 |
12 |
2 |
10 |
11 |
|
13 |
13 |
2 |
11 |
12 |
|
14 |
14 |
2 |
12 |
13 |
|
15 |
15 |
2 |
13 |
14 |
|
16 |
16 |
2 |
14 |
15 |
|
17 |
17 |
2 |
15 |
16 |
|
18 |
18 |
2 |
16 |
17 |
|
19 |
19 |
2 |
17 |
18 |
|
20 |
20 |
2 |
18 |
19 |
|
21 |
21 |
2 |
19 |
20 |
|
22 |
22 |
2 |
20 |
21 |
|
23 |
23 |
2 |
21 |
22 |
|
24 |
24 |
2 |
22 |
23 |
|
25 |
25 |
2 |
23 |
24 |
|
26 |
26 |
2 |
24 |
25 |
|
27 |
27 |
2 |
25 |
26 |
Additional sprockets may be required on idler shafts exceeding 1200mm
Product detail pictures:
Related Product Guide:
We've been committed to offering easy,time-saving and money-saving one-stop purchasing support of consumer for High reputation Stainless Steel Mesh Conveyor Belt - Wire Mesh Conveyor Belt Flat-Flex Type – JIKE, The product will supply to all over the world, such as: Turkmenistan, UK, Bangladesh, Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to supply our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We have been ready to face the worries and make the improve to understand all the possibilities in international trade.
By Jean Ascher from Uzbekistan - 2018.12.14 15:26
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Helen from Sweden - 2018.09.12 17:18
