OEM Supply Stainless Mesh Conveyor Belt – Wire Mesh Conveyor Belt Flat-Flex Type – JIKE Detail:
Flat-Flex® XT® conveyor belt is available in the following belt meshes:
- 7.26 X 1.60 mm
- 12.7 x 1.83 mm
- 9.60 x 1.83 mm
- 9.60 x 2.08 mm
Edge Loop Types Available:
C-Cure-Edge®
Single Loop Edge (SLE)
Flat-Flex® XT® Quick Reference Chart
|
XT Code Reference |
Pitch and Wire Diameter |
Nominal opening between wires |
Edge Loop Size |
XT Space Width |
Minimum Large Space Width |
Average Belt Weight (Kgs/m²) |
Maximum Tension per Joint – Kgf (N) |
Minimum Transfer Outside Diameter (grooved) |
Typical Open Area (%) |
|
X426 |
7.26 x 1.6 |
5.66 |
7 |
22.23 |
50.8 |
2.9 |
6.8 (66.7) |
19 |
71 |
|
X247 |
12.7 x 1.83 |
10.87 |
7 |
22.23 |
44.45 |
2.7 |
8.2 (80) |
25 |
78 |
|
X327 |
9.6 x 1.83 |
7.77 |
8 |
22.23 |
57.15 |
3.1 |
8.2 (80) |
25 |
74 |
|
X328 |
9.6 x 2.08 |
7.52 |
8 |
25.4 |
82.55 |
3.75 |
10 (98) |
25 |
72 |
| Width Tolerance(max. width 4267mm);0 to 150 belt width: +/-0.8 150 to 900 belt width: +/-1.9 900 to 1500 belt width: +/-2.4 over 1500 belt width: +/-3.2 |
|||||||||
All dimensions are in millimetres (mm)
Component and Support Requirements for Flat-Flex® XT® Belts
|
COMPONENT QUANTITY CHART (SPROCKETS / BLANKS / SUPPORT STRIPS) |
||||
|
Number of XT spaces across belt |
Drive shaft |
Idler shaft |
Belt supports |
|
|
Number of Sprockets |
Number of |
Wear Strips |
||
|
Sprockets |
Blanks |
|||
|
3 |
3 |
2 |
1 |
2 |
|
4 |
4 |
2 |
2 |
3 |
|
5 |
5 |
2 |
3 |
4 |
|
6 |
6 |
2 |
4 |
5 |
|
7 |
7 |
2 |
5 |
6 |
|
8 |
8 |
2 |
6 |
7 |
|
9 |
9 |
2 |
7 |
8 |
|
10 |
10 |
2 |
8 |
9 |
|
11 |
11 |
2 |
9 |
10 |
|
12 |
12 |
2 |
10 |
11 |
|
13 |
13 |
2 |
11 |
12 |
|
14 |
14 |
2 |
12 |
13 |
|
15 |
15 |
2 |
13 |
14 |
|
16 |
16 |
2 |
14 |
15 |
|
17 |
17 |
2 |
15 |
16 |
|
18 |
18 |
2 |
16 |
17 |
|
19 |
19 |
2 |
17 |
18 |
|
20 |
20 |
2 |
18 |
19 |
|
21 |
21 |
2 |
19 |
20 |
|
22 |
22 |
2 |
20 |
21 |
|
23 |
23 |
2 |
21 |
22 |
|
24 |
24 |
2 |
22 |
23 |
|
25 |
25 |
2 |
23 |
24 |
|
26 |
26 |
2 |
24 |
25 |
|
27 |
27 |
2 |
25 |
26 |
Additional sprockets may be required on idler shafts exceeding 1200mm
Product detail pictures:
Related Product Guide:
Well-run equipment, specialist income crew, and better after-sales services; We're also a unified major family, anyone stay with the organization value "unification, determination, tolerance" for OEM Supply Stainless Mesh Conveyor Belt – Wire Mesh Conveyor Belt Flat-Flex Type – JIKE, The product will supply to all over the world, such as: Turkmenistan, Niger, Lesotho, We always insist on the principle of "Quality and service are the life of the product". Till now, our products have been exported to more than 20 countries under our strict quality control and high level service.
By Margaret from Sierra Leone - 2018.10.31 10:02
This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
By Abigail from Jordan - 2017.09.09 10:18
